3M 5N11 N95 Particulate Filter

NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501.

When properly fitted, use with appropriate cartridges for various applications including spray painting, lacquering, petrochemical and chemical manufacturing, pesticide spraying and agriculture for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Use with 603 adapter if only particulate protection is required. Do not use in environments that are immediately dangerous to life or health (IDLH).

NIOSH-approved for respiratory protection against certain particulates
Replaceable for cost savings

These particulate filters are designed to be easily replaced for a cost effective solution. Use 3M™ Particulate Filters 5000 Series with 3M™ Gas/Vapor Cartridges and the 3M™ Filter Retainer 501 to help filter certain particulates including dusts, mists, fibers, and metal fumes in addition to a broad range of gases and vapors. Or, use these filters with 3M™ Filter Adapter 603 and the 3M™ Filter Retainer 501 to help reduce particulate exposures only. These filters are easy to install, requiring minimal training. Plus, the 3M™ Particulate Filters 5000 Series are compatible with 3M™ Half Facepieces 6000, 6500/6500QL, 7500 Series, Full Facepieces 6000, FF-400, 7800 Series, 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs.

Help protect your workforce

After you’ve determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M™ Reusable Respirator and corresponding N95 or P95 particulate filter.
3M™ Particulate Filters 5000 Series are NIOSH-approved as either N95 or P95 particulate filters and help provide respiratory protection in environments containing certain oil (P95) and non-oil (N95) based particulates when used with 3M™ Half and Full facepieces and additional accessories. These filters help provide respiratory protection from particulate contaminant concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA Permissible Exposure Limit (PEL) with quantitatively fit tested full facepieces. Not for use in environments that are immediately dangerous to life or health (IDLH) or require the use of a filter approved to 100 level filter efficiency (N100 to P100).