This product is made from natural latex using a unique formula and exquisite equipment, allowing it to be used continuously in 70% sulfuric acid solution and 30% sodium hydroxide solution. It is suitable for various industrial applications, including chemical, printing and dyeing, leatherworking, and electroplating. Additionally, it is also well-suited for agricultural, forestry, animal husbandry, and fishing operations.
Instructions for Use and Maintenance:
1. Before use, perform an inflation check. If any leakage is detected, stop using the gloves immediately.
2. During product usage, avoid contact with various oils and sharp metals.
3. After use, rinse off any residual acid or alkaline solution with clean water. Store the gloves in a place away from direct sunlight and allow them to dry naturally. Apply a small amount of talcum powder for preservation.
4. The presence of any adhesive marks on the surface of the gloves will not affect their performance, and they can continue to be used.
5. During transportation, the gloves should be covered to prevent moisture and heat exposure.
6. Store the product in a well-ventilated, cool, and dry warehouse with a temperature ranging from 0 to 30 degrees Celsius and a relative humidity below 80%. Keep the gloves at least 20cm above the ground and 1 meter away from any heat sources. Avoid stacking them too high.
7. During storage, strictly avoid placing the gloves together with substances harmful to them, such as oils and organic solvents.